{固定关键字1}-{固定关键字2}

首頁 >> 產品

聯系

打印

0-0

GSM-20H10自然數源表

最多讀取 ±210V/ ±1.05A/ 22W
4.3” TFT LCD, 數字5鼠標
四象限工作中
I/V線性、I/t線性、V/t線性
電壓功率源、功率源、數字6電表工作
0.012%差不多測定精準度, 6?數碼電表檢測, 1μV/10pA/10μΩ辯別率
內嵌式4種隊列打印輸出方式(Stair、Log、SRC-MEM、Custom), 多2500點
SDM(Source Delay Measure)
2/4/6線電阻功率軟件測試遠程電腦V-source和Measure Sensing
內置式Pass/Fail工作
電源接口: RS-232C, USBTMC, LAN, GPIB(選裝)

看看許多

產品的概述護膚品規(gui)格配件(jian)大全訂制信息內(nei)容下載安裝(zhuang)

GSM-20H10提拱±210V / ±1.05A / 22W的四象限運營。在首個象限和3、象限，患者當做開關電源模塊啟用，為過載變電。在2.和第五象限，患者當做過載安全使用，在室內耗散工作效率。而瞬時電流值值、瞬時電流值和電阻功率值能否在開關電源模塊或過載運營過后來量測，其正確度將高達0.012%還有分別率led光通量1μV/10pA/10μΩ。取樣的快慢上，GSM-20H10能夠最快50k點/每秒的取樣快慢，可更精確地對應待測物的性能指標開展介紹。穿過4.3寸的大長寬高電腦屏，更能否將大多數的量測選用、性能指標與結果都完整詳細的信息顯示在電腦屏上。能夠SDM (Source Delay Measure)效果，可選用信息產生發展時，延后開展取樣，逃避平衡前的信息被擷取回去引發誤判。內建幾種過程打出方法(Linear, Log, SRC-MEM, Custom)，頂多可能夠2500個點的過程發展打出。在機械設備確保上，GSM-20H10出具了OVP/OTP確保模式，；在OVP的方案上，的客戶可自理解OVP的范圍內，而OTP的確保則可以有效可以防止在檢查具體步驟中因室溫移位引發的不正確的。在電源插口個部分，本企業產品支技規則的SCPI標志位，出具RS-232 , USBTMC , LAN, GPIB (選裝)等電源插口，充分滿足手機用戶各種的電源插口要求。

產品規格

Maximum Range	Voltage		±210V
	Current		±1.05A
	Power		22W
	Voltage Resolution		1µV
	Current Resolution		10pA
Source	DC Voltage	Output Voltage	±21V/ ±1.05A, ±210V/±105 mA
		Current Limit	Min. 0.1% of range
		Programming Resolution	1µV, ±200.000mV range
			10µV, ±2.00000V range
			100µV, ±20.0000V range
			1mV, ±200.000V range
		Programming Accuracy 1	±(0.02%+600µV), ±200.000mV range
			±(0.02%+600µV), ±2.00000V range
			±(0.02%+2.4mV), ±20.0000V range
			±(0.02%+24mV), ±200.000V range
		Load Regulation	0.01% of range + 100µV
		Line Regulation	0.01% of range
		Overshoot	<0.1% typical (full scale step, resistive load,10mA range)
		Recovery Time (1000%Load Change)	<250µs (within 0.1% plus load regulation errors, 1A and 100mA compliance.)
		Ripple and Noise	4mV rms(20Hz~ 1MHz) 10mVpp(20Hz~ 1MHz)
		Temperature Coefficient (0°–18°C & 28°–50°C)	±(0.15 × accuracy specification)/°C
	DC Current	Output Current	±1.05A /±21V, ±105 mA /±210V
		Voltage Limit	Min. 0.1% of range
		Programmed Source Resolution	10pA, ±1.00000µA range
			100pA, ±10.0000µA range
			1nA, ±100.000µA range
			10nA, ±1.00000mA range
			100nA, ±10.00000mA range
			1µA, ±100.000mA range
			10µA, ±1.00000A range
		Programmed Source Accuracy 1	±(0.035%+600pA), ±1.00000µA range
			±(0.033%+2nA), ±10.0000µA range
			±(0.031%+20nA), ±100.000µA range
			±(0.034%+200nA), ±1.00000mA range
			±(0.045%+2µA), ±10.00000mA range
			±(0.066%+20µA), ±100.000mA range
			±(0.27%+900µA), ±1.00000A range
		Load Regulation	0 0.01% of range + 100pA
		Line Regulation	0.01% of range
		Overshoot	<0.1% typical (1mA step, RL = 10kΩ, 20V range).
		Temperature Coefficient (0°–18°C & 28°–50°C)	±(0.15 × accuracy specification)/°C
	General	Output Settling Time2	100µs typical Time
		Output Rise Time (±30%)	300µs, 200V range, 100mA compliance.
			150V/µs, 20V range, 100mA compliance.
		DC Floating Voltage	Output can be floated up to ±250VDC
		Remote Sense	Up to 1V drop per load lead.
		Compliance Accuracy	Add 0.3% of range and ±0.02% of reading to base specification.
		Range Change Overshoot 3	Adjacent range changes between 200mV, 2V and 20V ranges, 100mV typical.
		Minimum Compliance Value	0.1% of range
		Command Processing Time 4	Autorange On:10ms.Autorange Off:7ms.
Measurement	Voltage	Input Resistance	>10 G?
		Measurement Resolution	1µV, ±200.000mV range
			10µV, ±2.00000V range
			100µV, ±20.0000V range
			1mV, ±200.000V range
		Measurement Accuracy	±(0.012%+300µV), ±200.000mV range
			±(0.012%+300µV), ±2.00000V range
			±(0.015%+1.5mV), ±20.0000V range
			±(0.015%+10mV), ±200.000V range
		Temperature Coefficient (0°–18°C & 28°–50°C)	±(0.15 × accuracy specification)/°C
	Current	Voltage Burden (4-wire mode)	< 1mV
		Programmed Source Resolution	10pA, ±1.00000µA range
			100pA, ±10.0000µA range
			1nA, ±100.000µA range
			10nA, ±1.00000mA range
			100nA, ±10.00000mA range
			1µA, ±100.000mA range
			10µA, ±1.00000A range
		Programmed Source Accuracy1	±(0.029%+300pA)), ±1.00000µA range
			±(0.027%+700pA), ±10.0000µA range
			±(0.025%+6nA), ±100.000uA range
			±(0.027%+60nA), ±1.00000mA range
			±(0.035%+600nA), ±10.00000mA range
			±(0.055%+6µA), ±100.000mA range
			±(0.22%+570µA), ±1.00000A range
		Temperature Coefficient (0°–18°C & 28°–50°C)	±(0.1 × accuracy specification) / °C
	Resistance	Range	Resolution	Test current			Accuracy
		<2.00000Ω	---	---			Source IACC+Meas.VACC
		2.00000Ω	10µΩ	---			Source IACC+Meas.VACC
		20.0000Ω	100µΩ	100mA			±(0.1%+0.003 Ω), Normal
							±(0.07%+0.001 Ω), Enhanced
		200.000Ω	1mΩ	10mA			±(0.08%+0.03 Ω), Normal
							±(0.05%+0.01 Ω), Enhanced
		2.00000kΩ	10mΩ	1mA			±(0.07%+0.3 Ω), Normal
							±(0.05%+0.1 Ω), Enhanced
		20.0000kΩ	100mΩ	100µA			±(0.06%+3 Ω), Normal
							±(0.04%+1 Ω), Enhanced
		200.000kΩ	1Ω	10µA			±(0.07%+30 Ω), Normal
							±(0.05%+10 Ω), Enhanced
		2.00000MΩ	10Ω	5µA			±(0.11%+300 Ω), Normal
							±(0.05%+100 Ω), Enhanced
		20.0000MΩ	100Ω	0.5µA			±(0.11%+1k Ω), Normal
							±(0.05%+500 Ω), Enhanced
		200.000MΩ	1kΩ	100nA			±(0.66%+10k Ω), Normal
							±(0.35%+5k Ω), Enhanced
		>200.000M Ω	---	---			Source IACC+Meas.VACC
		Temperature Coefficient (0°–18°C & 28°–50°C)	±(0.15 × accuracy specification)/°C
		Source I mode, Manual OHMS	Total uncertainty = I source accuracy + V measure accuracy (4-wire remote sense).
		Source V mode, Manual OHMS	Total uncertainty = V source accuracy + I measure accuracy (4-wire remote sense).
		6-wire OHMS mode	Available using active ohms guard and guard sense. Max. Guard Output Current: 50mA (except 1A range). Accuracy is load dependent.
		Guard Output Impedance	<0.1? in ohms mode
System Speed	Maximum Range Change Rate		75/second
	Maximum Measure Auto Range Time		40ms (fixed source) 6
	Sequence reading rates7 (rdg./second) for 60Hz (50Hz)	Speed	NPLC/ Trig Origin	Measure				Source-Measure 9
				TO MEM.	TO GPIB			TO MEM.		TO GPIB
		Fast	0.01 / internal	2081 (2030)	1198 (1210)			1551 (1515)		1000 (900)
		488.2	0.01 / external	1239 (1200)	1079 (1050)			1018 (990)		916 (835)
		Medium	0.1 / internal	510 (433)	509 (433)			470 (405)		470 (410)
		488.2	0.1 / external	438 (380)	438 (380)			409 (360)		409 (365)
		Normal	1 / internal	59 (49)	59 (49)			58 (48)		58 (48)
		488.2	1 / external	57 (48)	57 (48)			57 (48)		57 (47)
		Speed	NPLC/ Trig Origin	Source-Measure Pass/Fail test 8,9				Measure Memory 9
				TO MEM.	TO GPIB			TO MEM.		TO GPIB
		Fast	0.01 / internal	902 (900)	809 (840)			165 (162)		164 (162)
		488.2	0.01 / external	830 (830)	756 (780)			163 (160)		162 (160)
		Medium	0.1 / internal	389 (343)	388 (343)			133 (126)		132 (126)
		488.2	0.1 / external	374 (333)	374 (333)			131 (125)		131 (125)
		Normal	1 / internal	56 (47)	56 (47)			44 (38)		44 (38)
		488.2	1 / external	56 (47)	56 (47)			44 (38)		44 (38)
	Single Reading Operation Rates (rdg./second) for 60Hz (50Hz)	Speed	NPLC/ Trig Origin	Measure		Source-Measure 9			Source-Measure Pass/Fail test 8,9
				TO GPIB		TO GPIB			TO GPIB
		Fast(488.2)	0.01 / internal	256 (256)		79 (83)			79 (83)
		Medium(488.2)	0.1 / internal	167 (166)		72 (70)			69 (70)
		Normal(488.2)	1 / internal	49 (42)		34 (31)			35 (30)
	Component Interface Handler Time for 60Hz (50Hz):8, 10	Speed	NPLC/ Trig Origin	Measure		Source Pass/Fail test			Source-Measure Pass/Fail test 9,11
				TO GPIB		TO GPIB			TO GPIB
		Fast	0.01 / internal	1.04 ms (1.08 ms)		0.5 ms (0.5 ms)			4.82 ms (5.3 ms)
		Medium	0.1 / internal	2.55 ms (2.9 ms)		0.5 ms (0.5 ms)			6.27 ms (7.1 ms)
		Normal	1 / internal	17.53 ms (20.9 ms)		0.5 ms (0.5 ms)			21.31 ms (25.0 ms)
System General	Load Impedance		Stable into 20,000pF typical
	Differential mode Voltage		250 VPk
	Common mode Voltage		250 VDC
	Common mode Isolation		>10G?, <1000pF
	Over Range		105% of range, source and measure.
	Max. Voltage drop		5V
	Max. Sense lead Resistance		1M?
	Sense input Impedance		>100G ?
	Guard offset Voltage		<150µV, typical
	Source output modes		Fixed DC level, Memory List (mixed function), Stair (linear and log)
	Source memory list		100 points max.
	Memory buffer		5,000 readings @ 5 digits (two 2,500 point buffers). Includes selected measured value(s) and time stamp. Lithium battery backup(3 yr+ battery life).
	Programmability		IEEE-488.2 (SCPI)
			5 user-definable power-up states plus factory default and *RST.
	Digital I/O Connector		Active low input.
			Start of test, end of test, 3 category bits.
			+5V@ 300mA supply.
			1 trigger input, 4 TTL/Relay Drive outputs (33V @ 500mA, diode)
	Remote Interface		USB/GPIB/LAN/RS-232
	Insulation	Chassis and Terminal	20M? or above (DC 500V)
		Chassis and AC cord	30M? or above (DC 500V)
	Operation Environment		Indoor use, Altitude: ≤ 2000m Ambient temperature: 0 ~ 40°C Relative humidity: ≤ 80%
			Installation category: II, Pollution degree: 2
	Storage Environment		Temperature: -20?C ~ 70?C
			Humidity: < 80%
	Input Power		100-240VAC, 50-60Hz
	Power Consumption		80W
	Accessories		CD User manual x1, Quick Start manual x1
			Test lead GTL-207A x 1, GTL-108A x 1, ALLIGATOR CLIP x 2
	Dimensions		214 (W) x 86 (H) x 356.5 (D) mm
	Weight		Approx. 4.8kg

Remarks

Speed = Normal (1 PLC). For 0.1 PLC, add 0.005% of range to offset specifications, except 200mV, 1A ranges, add 0.05%. For 0.01 PLC, add 0.05% of range to offset specifications, except 200mV, 1A ranges, add 0.5%.
Required to reach 0.1% of final value after Command is processed. Resistive load. 10µA to 100mA range.
Overshoot into a fully resistive 100k? load, 10Hz to 1MHz BW, adjacent ranges: 100mV typical, except 20V/200V.
Maximum time required for the output to begin to change following the receipt of :SOURce:VOLTage|CURRent <nrf> Command
Reading rates applicable for voltage or current measurements, autorange off, filter off, display off, trigger delay = 0, and binary reading forma.
Purely resistive lead. 1µA and 10µA ranges <65ms.
1000 point sweep was characterized with the source on a fixed rang.
Pass/Fail test performed using one high limit and one low math limit.
Includes time to re-program source to a new level before making measurement.
Time from falling edge of START OF TEST signal to falling edge of END OF TEST signal.
Command processing time of :SOURce:VOLTage|CURRent: TRIGgered<nrf> Command not included.

點擊下載

標準配置

采用工作手冊CD*1 電源模塊線*1 檢查線GTL-207A*1 GTL-203A*1 GTL-204A*1

選配

SM-03, GPIB Card

選購配件

SM-01	Digital I/O Adapter, Convert DB15 to DB9 + 8-pin micro-DIN
SM-02	Digital I/O Adapter, Convert DB15 to DB37 + 8-pin micro-DIN
GTL-246	USB Cable (USB 2.0 A-B Type, approx. 1200mm)
GTL-258	GPIB Cable (25 pin Micro-D Connector)

GSM-20H10(帶GPIB) 高gps精度源(yuan)表

GSM-20H10     高(gao)精密度源表

選擇購置

源表折頁

2023-06-06

源表折頁源表折頁 4.60M 下載

Software

GSM-20H10軟件（運行前必須安裝NI Labview Runtime 32bit）

2023-11-29

Software GSM-20H10電腦軟件（正常運作前肯定布置NI Labview Runtime 32bit） 0.75M 下載

GSM-20H10中文字幕情況使用指南

GSM-20H10中文說明書

2023-06-21

GSM-20H10中文字幕反映書 GSM-20H10中文名介紹書 6.38M 下載

GSM-20H10 Labview驅...

GSM-20H10 Labview驅動

2023-06-06

GSM-20H10 Labview驅動器 GSM-20H10 Labview驅程 0.97M 下載

無此數據信息！

涉及到(dao)類別

暫不信息

国产九九久久99精品影院|99久久免费国产精品6|男人与女人免费做爽爽视频|九色91popny国产老熟女